|
 |
Email us at info@pyzique.com
or write:
PYZIQUE Wall Systems, Inc.
1727 NW 99th Street
Clive, IA 50325
or call 573-230-4974
|
|
|
 |
- Multi-stone system with no fixed or required pattern
- Two faces on all five stones
- Each stone is named, allowing directions to be followed – A, B, X, and Y plus the Cap stone
- Center split groove [front to back] on A, B, and Y stones for building corners, columns and wall-ends easily – no over ordering of corner units – color of corner units matches with the rest of the wall – the height of the corner unit matches with the rest of the wall
- Two molds only – The A, B, X and Y in one mold, 2 cap stones in the other mold [On a 3 block machine these stones are 98% of full size]
- Producer makes Split-face and Antique MaytRx stones
- Stones are flat, this allows easy construction of freestanding walls, steps and many other structures
- Maytrx's flat stones allow bump-out and Old English [staggered individual stones] walls to be built easily
- Cap stone can be used as solider in a wall
- Cap stone can be used horizontally in walls to stagger stone layers in a wall
- The A stone can be used as a solider in landscape retaining walls
- Pullout test and Shear test are available for engineered walls
- Pins are used in engineered SRWs for holding grid in place during construction of a wall and assurance of designed set back
- Pins are 6 ½ inches long, this assures they are in the groove below that determines set-back
- Pins are low cost
- Visual alignment on landscape retaining walls and freestanding walls [no pins needed] reduces cost
- Castle cap layer is exclusive to MaytRx system – replaces level cap layer
- Ledges for potted plants and garden nic-nacs can be built into MaytRx walls with the MaytRx Cap stones
- 20 inch square and larger columns
- MaytRx stones, MaytRx Cap stones and PYZIQUE stones can be used to build 6” or 7” rise steps
- MaytRx stones are flat – there are no rear lips or set-back nubs that cut geogrid
- Geogrid placement tables are available
- Engineering drawings are available
- MaytRx's web site has pullout and shear test, geogrid placement tables and engineering drawings available for download
|
|